Feather pottery is made from a white clay that has been bisque fired to a lower than usual temperature. This leaves the fired clay body quite porous, enabling it to absorb the carbon from burning Feathers. Later, the bisque is warmed up in the kiln to about 1300 degrees Fahrenheit. When it is removed, individual Feathers are laid against the hot surface. If the temperature on the surface of the piece is just right, the feather will attach to the pot, and begin to burn. As the ash forms, a small deposit of carbon and smoke is absorbed into the clay surface, leaving a permanent trace of the feather. As the temperature falls below 900 degrees Fahrenheit, the pot will no longer accept the feather, and the process is over. When the ashes are washed away and the piece is completely dry, it is usually polished with a paste wax or sprayed with an aerosol furniture polish to give it a soft satin finish and lasting luster.

Because Feather pottery must be porous in order to achieve the effect, it is not to be used as a water vessel for fresh flowers. Its use is solely as a piece of art to enhance the décor of your favorite room or to make a statement about your appreciation of your Bird. It makes a nice conversation started if you take it to work. If you like I can carve the name of your bird on the bottom of the vessel.

Send this link to a friend